Tool for fitting and removing oscillating weight of ETA movement caliber ETA 7750 - 7751 - 7753 ETA 2000.1 - 2892 - 2893 - 2894 - 2895. Swiss Made by Horotec
Broken screw extractor. Reversible driving pins. Pins diameter: 0,80 and 1,00mm
Reversible driving pins for Bergeon n. 30209 Ref. 30209-A 0,40/0,50mm Ref. 30209-B 0,50/0,60mm Ref. 30209-C 0,80/1,00mm
Liquido speciale per togliere le viti rotte da ponti e platine. Per un risultato ottimale, si consiglia di immergere la platina, in cui è rotta la vite, nel vissin riscaldato sulla fiamma. Poi risciacquare e pulire con benzina: la vite sarà magicamente scomparsa !
Tool for closing barrel. Allows easy fitting of the barrel cover with his drum. Diameter: 2,50cm Swiss Made by Bergeon
Mainspring winder Bergeon n.2729 for ETA movement n°03 per ETA 2660-2671-2678-2688 n°05 per ETA 2824/2-2834-2/2836-2 n°07 per ETA 2892-2893-2894-2895-2896-2897 n°09 per ETA 7750-7751-7753-7754
Lantern chuck with 3 lanterns. To round off and polish screw ends. Holes: 0,40 / 0,60 / 0,80mm
White cold enamel for restaurng dial. Instructions of use: Heat a knife blade and take a small quantity of enamel. Put it immediately to the damaged part of the dial.
Rust remover Bergeon n. 30496. Instruction for use: leave the movement in the bath for about two minutes; then rinse with water and dry immediately. For small parts, wet a piece of pegwood and rub the spot of rust. Never dry the movement without having rinsed it Bottle of 50gr.
For removing wheels on third wheel arbors and for chronographdriving wheels with 5 spokes.Blue handle
For removing wheels on third wheel arbors and for chronographdriving wheels with 6 spokes.Red handle
Hands, cannon pinions, sweep wheels and chronograph driving wheel remover. For removing cannon pinions and hands of large watches, stronger.Green handle
Watchmaker set Incl: quality screw driver, blade 1,00 mm and replacement blade quality screw driver, blade 1,20 mm and replacement blade quality screw driver, blade 1,60 mm and replacement blade spring bar tool tweezers made of plastic case opener for screwed-on cases case opener for pressed-in cases - swiss made assortment of spring bars 4 x loupe...
Hexagonal plug in polished hardened steel, with 15 calibrated holes from Ø 0.8 to 6.3 mm and 4 notches of different sizes.Dimensions: 46 x 46 x 15 mm